Scandic Oil - West Wind Hardwood

Scandic Oil

$85.00

This new wood oil from Oli-Natura creates a raw wood effect and is an environmentally-friendly protective treatment for light woods.

An innovative combination of vegetable oils in aqueous emulsion prevents the wood from becoming grainier and ensures the highest quality and longevity. The wood looks amazingly natural, the oil providing the surface with elegance and understatement of pure nature. The velvet matte surface creates a unique feel of its own with a special charm. It is robust as well as protected by being water and dirt repellent.

SKU: N/A Category:

Description

Packaging:

1 litre

Consumption:

2 coats I 60-80 g/sqm per coat (12-15 sqm/l), depending on the type of wood

Tools:

Microfiber roller (5 mm), flat brush, white pad

Testing Standards

  • EU – Decopaint Directive
  • Z-157.10-217 (Low-emission; certified construction product in accordance with DIBt standards)
  • DIN 71-3 (safety of toys)
  • DIN 53160 (saliva and sweat proof)
  • VOC-free and free formaldehyde, cobalt and oxime. The cured material is safe for humans, animals and plants.

Application Instructions

Surface preparation: 

  • Sand the wood surface thoroughly; start with coarse grit, final sanding for flooring with grit 100-150, for furniture with grit 150-240.
  • The surface must be dry, thoroughly cleaned and free of oil, wax, grease, silicon and sanding dust.
  • For parquet flooring we recommend you to fill the joints with joint filler solution and sanding dust before the final sanding.

Setup recommendations: 

  • Shake the container well. Working in sections, pour the oil for 5-10 sqm (60-80 g/sqm depending on type of wood) on the surface. Work in overlapping webs and apply evenly and thinly with a flat brush or microfibre roller (5 mm)
  • After a drying time of 10-20 minutes buff the oil in by hand or a buffing machine with a white pad until the surface appears uniformly matt.
  • Remove any excess oil with a cotton cloth.
  • After a drying time of 2 hours, repeat the application as described above. Remove any excess oil with a cotton cloth.

Drying:

  • Depending on the air humidity and temperature, the oiled surface will be dust dry after 1 hours, carefully walk-able after 2 hours and fully hardened after 3-5 days. Protect it from water during this time.

Note: Cloths, pads or wood dust soaked with oil can spontaneously ignite due to heat build-up, therefore please clean immediately after use or store under water.

Reviews

There are no reviews yet.

Be the first to review “Scandic Oil”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.