|
|
 |
|
| OLI-NATURA HArd Wax Oil |
 |
OLI NATURA Hard Wax Oil is a special oil and wax combination for the treatment of wood floors and interiour wood.
The oil penetrates deeply into the wood while the wax remains on the surface and causes a silk-matte gloss, which can be further intensified through polishing.
Surfaces protected this way are easy to clean, and resistant to
dirt and water. |
| Properties: |
| |
- suitable for nearly all wood types
- easy application, by machine and manually
- impregnates and protects
- skid resistant
- water-resistant
- comfortable room climate
- Giscode Ö60
|
| |
Test standards adheared to: |
| |
In accordance with the Decopaint regulation |
| |
- DIN 531160 (resistance o salvia and sweat )
- DIN EN 71-3 (Security of toys)
- Free of formaldehyde and aromatics
- Does not contain biocidic substances or preservatives
|
| |
Areas of application: |
| |
For the basic treatment of untreated wooden, cork and OSB floors as well as stairs, doors and interior working surfaces. |
| |
Ordering information: |
| |
| |
OLI-NATURA hard wax oil |
710 009 18 |
| |
Container sizes |
3 / 1 Litre |
|
| |
Ingredients: |
| |
Modified vegetable oils and waxes, such as linseed oil and carnauba wax; Disaromatized hydrocarbons; lead-free drying agents |
| |
Storage properties: |
| |
Storage time in unopened containers 12 months. Avoid temperatures over +30 °C at storage and transport. |
| |
Labelling: |
| |
Please find details of the labelling and safety information on our safety data sheet. |
| |
Application: |
|
-
Sand the wood gradually with grain sizes 80/100/120. The surface has to be clean, dry and free of grease, oil, wax and dust. With wooden floors we recommend you to fill in the gaps with OLI putty and sanding powder before the final sanding.
-
Stir the hard wax oil well and pour it carefully on the surface (approx. 40-50 g/m²). Then spread it evenly thin with a brush, spatula or a mohair roller.
-
Let the hard wax oil soak in for 20 to 30 minutes. Then rub it in with an oil brush or, if you have a wooden floor, with a single-disc machine with a beige or white pad.
-
After a drying time of 6 to 8 hours, repeat the application as described in steps 2 and 3.
-
Depending on the humidity and the temperatures, the oil is hardened after 2 to 3 days. Protect the surface from water during this time.
|
| |
Comments/notes on use: |
| |
- Do not apply at floor temperatures below 12°C.
- Drying data refer to measurements under everyday conditions of
- 20°C and 50% humidity.
- Sand damaged areas well and apply 1-2 layers of hard wax oil!
- Danger of spontaneous ignition! Clean used cloths/pads directly after use or keep them in water.
|
| |
Follow-up treatment and care: |
| |
Use OLI-NATURA care wax for first care and refreshment. For common maintenance cleaning we recommend OLI-NATURA wood soap. |
The verbal and written recommendations for application which we offer based on our experience and to the best of our knowledge in support of the user are consistent with the state of the art in regard to technology and practice. These recommendations are, however, not binding and constitute neither a legal relationship nor subsidiary obligations in connection with the purchase contract. They do not relieve the purchaser of the obligation to control our products for suitability in regard to the intended use. This statement supersedes all previous versions. Version: April 2007 |
|
| |
|
| |
|
|
|
West Wind Hardwood Inc.
Sidney BC Canada
Tel: 1-800-667-2275
westwind@islandnet.com
|
|
|
Providing Exotic & Domestic Hardwoods & Softwoods, Boat Lumber, Cabinet and Marine Plywood & Veneers as well as Natural Oil Wood Finishes to Canada, & The USA: British Columbia, Alberta, Ontario, Washington, New York, Colorado, & California including: Victoria, Vancouver, Whistler, Calgary, Toronto, Seattle, New York, Denver, Los Angeles. |
 |
|
|
|
|
